Can Your Toilet’s Secret Life Be Revealed? Find Out How to Replace Its Tank!
What To Know
- The answer is yes, it is possible to replace a toilet tank, and it’s a relatively easy and inexpensive DIY project that can save you money.
- Insert the tank bolts through the holes in the tank and bowl.
- Can I replace a toilet tank without replacing the bowl.
If your toilet is malfunctioning, you may be wondering if it’s possible to replace just the tank rather than the entire toilet. The answer is yes, it is possible to replace a toilet tank, and it’s a relatively easy and inexpensive DIY project that can save you money.
Materials You’ll Need
Before you begin, gather the following materials:
- New toilet tank
- Tank-to-bowl gasket
- Toilet tank bolts
- Toilet tank lid
- Wrench
- Screwdriver
- Plumber’s putty (optional)
Safety First
Before working on any plumbing, turn off the water supply to the toilet. Flush the toilet to empty the tank, then disconnect the water supply line.
Step-by-Step Instructions
1. Remove the Old Tank
- Unscrew the nuts holding the tank bolts in place.
- Lift the tank straight up and off the bowl.
- Clean the top of the bowl where the tank sat.
2. Install the Tank-to-Bowl Gasket
- Apply a bead of plumber’s putty around the base of the new tank.
- Place the tank-to-bowl gasket on top of the putty.
3. Position the New Tank
- Lift the new tank into place and align it with the bowl.
- Lower the tank onto the gasket.
4. Install the Tank Bolts
- Insert the tank bolts through the holes in the tank and bowl.
- Hand-tighten the nuts until they are snug.
- Use a wrench to tighten the nuts further, but be careful not to overtighten.
5. Connect the Water Supply Line
- Reattach the water supply line to the tank.
- Turn on the water supply and check for leaks.
6. Install the Toilet Tank Lid
- Place the toilet tank lid on top of the tank.
- Screw the bolts into the holes in the lid.
Troubleshooting Common Problems
Tank is Leaking
- Check the tank-to-bowl gasket for tears or gaps.
- Tighten the tank bolts.
- If the leak persists, you may need to replace the gasket.
Toilet Won’t Flush
- Check the fill valve to make sure it’s working properly.
- Clean the flush valve and flapper.
- If the problem persists, you may need to replace the flush valve.
Wrap-Up: DIY Toilet Tank Replacement Made Easy
Replacing a toilet tank is a relatively simple project that can save you money and time. By following these step-by-step instructions and troubleshooting common problems, you can easily replace your toilet tank and get your toilet functioning properly again.
Top Questions Asked
Q: Can I replace a toilet tank without replacing the bowl?
A: Yes, it is possible to replace just the tank.
Q: How much does it cost to replace a toilet tank?
A: The cost of a new toilet tank can range from $20 to $100.
Q: How long does it take to replace a toilet tank?
A: With basic plumbing skills, you can replace a toilet tank in about an hour.
Q: What type of tank should I choose?
A: Choose a tank that is compatible with your bowl. Consider the size, shape, and material.
Q: Can I paint a toilet tank?
A: Yes, you can paint a toilet tank with epoxy-based paint.
