Say Goodbye to Leaky Seals: Discover the Secret to Flawless Water Pump Performance

If you’re an avid Can Am rider, you know that regular maintenance is crucial to keeping your machine running smoothly. One of the most important maintenance tasks is replacing the water pump seal. While this may seem like a daunting task, it’s actually quite simple with the right tools. In this blog post, we’ll provide you with a step-by-step guide on how to use a Can Am water pump seal tool to replace the seal in your machine.

Tools and Materials You’ll Need

Before you begin, you’ll need to gather the following tools and materials:

• Can Am water pump seal tool
• New water pump seal
• Socket wrench
• Torque wrench
• Loctite sealant

Safety First

Before you start working on your Can Am, be sure to take the following safety precautions:

• Wear safety glasses and gloves.
• Disconnect the battery.
• Allow the engine to cool down completely.

Step-by-Step Guide

1. Remove the Water Pump Cover

Using a socket wrench, remove the bolts that hold the water pump cover in place. Once the bolts are removed, carefully lift the cover off the water pump.

2. Remove the Old Water Pump Seal

Using the Can Am water pump seal tool, carefully remove the old water pump seal. Be careful not to damage the water pump housing.

3. Clean the Water Pump Housing

Once the old seal is removed, clean the water pump housing thoroughly. Remove any dirt or debris that may have accumulated.

4. Apply Loctite Sealant

Apply a thin layer of Loctite sealant to the outer edge of the new water pump seal.

5. Install the New Water Pump Seal

Using the Can Am water pump seal tool, carefully install the new water pump seal into the water pump housing. Be sure to press the seal in firmly until it is seated properly.

6. Install the Water Pump Cover

Place the water pump cover back onto the water pump housing. Be sure to align the cover correctly.

7. Torque the Bolts

Using a torque wrench, tighten the bolts that hold the water pump cover in place. Be sure to tighten the bolts to the specified torque.

Tips for Success

• Use a new water pump seal every time you replace the seal.
• Clean the water pump housing thoroughly before installing the new seal.
• Apply a thin layer of Loctite sealant to the outer edge of the new seal.
• Torque the bolts to the specified torque.

Troubleshooting

If you encounter any problems while replacing the water pump seal, consult your Can Am service manual or contact a qualified mechanic.

The Bottom Line

Replacing the water pump seal in your Can Am is a simple task that can be completed in a few hours. By following the steps outlined in this guide, you can ensure that your machine is running smoothly and efficiently.

Questions You May Have

Q: How often should I replace the water pump seal?

A: The water pump seal should be replaced every 50,000 miles or 5 years, whichever comes first.

Q: What are the symptoms of a failing water pump seal?

A: Symptoms of a failing water pump seal include:

• Leaking coolant
• Overheating engine
• Loss of power

Q: Can I replace the water pump seal myself?

A: Yes, you can replace the water pump seal yourself with the right tools and materials. However, if you are not comfortable working on your Can Am, it is best to consult a qualified mechanic.