Save Money And Keep Your Gravely Zero Turn Mower Running Smoothly: Learn How To Change Your Air Filter

Regular maintenance is crucial for keeping your Gravely zero turn mower running smoothly and efficiently. One essential task you should not overlook is changing the air filter. A clean air filter ensures that your engine receives a steady supply of clean air, which is vital for optimal performance and longevity. This blog post will provide you with a comprehensive step-by-step guide on how to change the air filter on your Gravely zero turn mower.

Safety First

Before you begin any maintenance work on your mower, it is imperative to take the necessary safety precautions.

• Park the mower on a level surface and engage the parking brake.
• Allow the engine to cool down completely.
• Disconnect the spark plug wire to prevent accidental starting.

Locate the Air Filter

The air filter is typically located in one of two places on Gravely zero turn mowers:

• Under the hood: Open the hood and look for a housing or cover labeled “air filter.”
• On the side of the engine: Check the side of the engine for a cylindrical-shaped housing with a label indicating “air filter.”

Remove the Air Filter Housing

Once you have located the air filter, proceed to remove the housing. The housing is usually secured by clips or screws.

• Clips: Squeeze the clips together to release the housing.
• Screws: Use a screwdriver to remove the screws holding the housing in place.

Inspect the Air Filter

Carefully remove the old air filter from the housing. Inspect it for any dirt, debris, or damage. A dirty or damaged air filter should be replaced immediately.

Install the New Air Filter

Take the new air filter and insert it into the housing. Ensure that the filter is seated correctly and the gasket (if any) is in place.

Reinstall the Air Filter Housing

Reinstall the air filter housing by aligning it with the mounting points.

• Clips: Push the clips into place to secure the housing.
• Screws: Tighten the screws to secure the housing.

Reconnect the Spark Plug Wire

Reconnect the spark plug wire to the spark plug.

Start the Mower and Check for Leaks

Start the mower and let it run for a few minutes. Check around the air filter housing for any air leaks. If you notice any leaks, stop the mower and recheck the installation of the filter and housing.

Final Note

Changing the air filter on your Gravely zero turn mower is a straightforward task that can significantly improve the performance and lifespan of your engine. By following the steps outlined in this guide, you can ensure that your mower receives the clean air it needs to operate at its best. Remember to check and replace the air filter regularly as part of your routine maintenance schedule.

Frequently Asked Questions

Q: How often should I change the air filter on my Gravely zero turn mower?
A: The frequency of air filter replacement depends on the operating conditions. In general, it is recommended to change the air filter every 100 hours of operation or annually, whichever comes first.

Q: Can I clean and reuse the old air filter?
A: No, it is not recommended to clean and reuse the old air filter. Once an air filter becomes clogged with dirt and debris, it cannot be effectively cleaned and should be replaced.

Q: What are the signs of a dirty air filter?
A: Signs of a dirty air filter include reduced engine power, increased fuel consumption, and difficulty starting the engine.