Tired of Dim Soap Dispensers? Master the Art of Changing Batteries in Purell ES8

Maintaining the cleanliness and functionality of your Purell ES8 soap dispenser is crucial for hygiene and public health. One essential aspect of this upkeep is replacing the batteries that power the device. This blog post will provide a comprehensive guide on how to change batteries in a Purell ES8 soap dispenser, ensuring its smooth operation and continued germ protection.

Materials Required

• New 4 C-cell alkaline batteries
• Phillips-head screwdriver

Step-by-Step Instructions

1. Gather Materials: Ensure you have all the necessary materials before commencing the battery replacement process.

2. Locate the Battery Compartment: The battery compartment is situated at the bottom of the dispenser. Locate the small, round cover that conceals the batteries.

3. Remove the Battery Cover: Using a Phillips-head screwdriver, carefully unscrew the battery cover counterclockwise.

4. Remove Old Batteries: Once the cover is removed, you will see the four C-cell batteries. Gently lift them out of the compartment.

5. Insert New Batteries: Take the new batteries and insert them into the compartment. Ensure that the positive (+) and negative (-) terminals are aligned correctly.

6. Replace the Battery Cover: Once the new batteries are in place, screw the battery cover back onto the dispenser clockwise until it is secure.

7. Test the Dispenser: Press the button on the soap dispenser to ensure that it is working correctly. If it dispenses soap, the battery replacement was successful.

Troubleshooting Tips

• Dispenser Not Dispensing Soap: If the dispenser does not dispense soap after replacing the batteries, check if the batteries are inserted correctly or if they are weak.
• Battery Cover Won’t Open: If you encounter difficulty opening the battery cover, apply gentle pressure while turning the screwdriver counterclockwise.
• Soap Leaks: If soap leaks from the dispenser, check if the battery cover is secure and if the dispenser is upright.

Safety Precautions

• Always use new alkaline batteries.
• Do not mix old and new batteries.
• Dispose of old batteries properly.
• Do not attempt to recharge the batteries.

Maintenance Tips

• Replace batteries regularly to ensure optimal performance.
• Clean the dispenser regularly with a mild detergent and water.
• Avoid using abrasive cleaners or chemicals.

Recommendations: Ensuring Continuous Hand Hygiene

By following these steps, you can effortlessly change batteries in your Purell ES8 soap dispenser, ensuring its reliable operation and the continuous protection of your hands from germs. Remember to practice regular maintenance and safety precautions to maintain the hygiene and functionality of your dispenser.

Questions You May Have

1. How often should I replace the batteries in my Purell ES8 soap dispenser?

Typically, batteries should be replaced every 3-6 months or when the dispenser starts to dispense soap slowly or irregularly.

2. What type of batteries does the Purell ES8 soap dispenser use?

The Purell ES8 soap dispenser requires 4 C-cell alkaline batteries.

3. Can I use rechargeable batteries in my Purell ES8 soap dispenser?

No, rechargeable batteries are not recommended for use in the Purell ES8 soap dispenser.