How To Drain Your Frigidaire Dishwasher In Just 3 Easy Steps!
What To Know
- Draining a Frigidaire dishwasher is a relatively simple task that can be accomplished in a few easy steps.
- If you are unable to locate or remove a clog in the drain hose, you may need to call a professional plumber for assistance.
- There are several reasons why your dishwasher may not be draining, including clogs in the drain hose, a faulty drain pump, or a problem with the dishwasher’s control board.
If your Frigidaire dishwasher has stopped draining, leaving you with a sink full of dirty dishes, don’t panic! Draining a Frigidaire dishwasher is a relatively simple task that can be accomplished in a few easy steps. This step-by-step guide will provide you with all the instructions you need to get your dishwasher draining again in no time.
Safety First
Before you begin, be sure to unplug the dishwasher from the electrical outlet and turn off the water supply. This will prevent any accidental shocks or water damage.
Locate the Drain Hose
The first step is to locate the drain hose. This hose is typically found at the back of the dishwasher, near the bottom. It will be connected to the drainpipe under your sink.
Disconnect the Drain Hose
Once you have located the drain hose, disconnect it from the drainpipe. Be careful not to spill any water that may have accumulated in the hose.
Check for Clogs
Inspect the drain hose for any clogs or blockages. You may find food particles, grease, or other debris blocking the flow of water. Use a flashlight to check the inside of the hose thoroughly.
Clean the Drain Hose
If you find any clogs, use a wire or pipe cleaner to carefully remove them. You can also flush the hose with hot water to clear away any remaining debris.
Reconnect the Drain Hose
Once the drain hose is clean, reconnect it to the drainpipe. Make sure the connection is secure to prevent leaks.
Reset the Dishwasher
Once the drain hose is reconnected, reset the dishwasher by pressing the “Cancel” or “Reset” button. This will clear any error codes that may have been triggered by the drainage issue.
Run a Test Cycle
To ensure that your dishwasher is draining properly, run a test cycle with a small amount of dishes. If the dishes come out clean and dry, then your dishwasher is draining correctly.
Additional Tips
- If you are unable to locate or remove a clog in the drain hose, you may need to call a professional plumber for assistance.
- To prevent future clogs, regularly clean the filter in your dishwasher.
- Avoid putting large food particles, grease, or oil in your dishwasher, as these can contribute to clogs.
- If your dishwasher is still not draining properly after following these steps, there may be a more serious issue that requires professional repair.
Wrapping Up
Draining a Frigidaire dishwasher is a straightforward process that can be easily accomplished by following the steps outlined in this guide. By keeping your dishwasher clean and free of clogs, you can ensure that it continues to operate efficiently for years to come.
FAQ
Q: Why is my Frigidaire dishwasher not draining?
A: There are several reasons why your dishwasher may not be draining, including clogs in the drain hose, a faulty drain pump, or a problem with the dishwasher’s control board.
Q: How do I reset my Frigidaire dishwasher?
A: To reset your Frigidaire dishwasher, press and hold the “Cancel” or “Reset” button for a few seconds. The dishwasher will beep and the lights will flash, indicating that it has been reset.
Q: How often should I clean the filter in my Frigidaire dishwasher?
A: It is recommended to clean the filter in your Frigidaire dishwasher every 1-2 months, or more often if you have hard water or frequently wash greasy dishes.
