Drain Your Water Pump Like a Pro: A Beginner’s Guide
What To Know
- Draining a water pump is a relatively simple process that can be completed in a few steps.
- Place a bucket or other container under the drain plug to catch the water that will be drained from the pump.
- If you are unable to drain your water pump yourself, or if you suspect that the pump is damaged, it is best to call a professional plumber.
If you’re experiencing a problem with your water pump, one of the first steps you should take is to drain it. This can help to identify the problem and determine if the pump needs to be replaced. Draining a water pump is a relatively simple process that can be completed in a few steps.
Materials You’ll Need
- Bucket or other container
- Drain plug wrench
- Rags or towels
- Safety glasses
Safety First
Before you begin, it’s important to take some safety precautions. Wear safety glasses to protect your eyes from any debris that may be released when you drain the pump. Also, be sure to turn off the power to the pump before you start working on it.
Step-by-Step Instructions
1. Locate the Drain Plug
The drain plug is typically located on the bottom of the water pump. It is usually a small, plastic or metal plug that can be removed with a drain plug wrench.
2. Place a Bucket Under the Pump
Place a bucket or other container under the drain plug to catch the water that will be drained from the pump.
3. Remove the Drain Plug
Use the drain plug wrench to loosen the drain plug. Be careful not to overtighten the plug, as this can damage the pump.
4. Drain the Water
Once the drain plug is loosened, water will begin to flow out of the pump. Allow the water to drain completely into the bucket.
5. Reinstall the Drain Plug
Once the water has drained completely, reinstall the drain plug. Tighten the plug until it is snug, but do not overtighten.
6. Turn on the Power
Once the drain plug is reinstalled, turn on the power to the pump. The pump should now be working properly.
7. Check for Leaks
After the pump is turned on, check for any leaks around the drain plug. If you see any leaks, tighten the plug further.
Troubleshooting
If you are having trouble draining your water pump, there are a few things you can check.
- Make sure the drain plug is open. The drain plug should be completely open in order for the water to drain properly.
- Check for debris. If there is any debris blocking the drain plug, it will prevent the water from draining. Remove any debris that you find.
- Inspect the pump for damage. If the pump is damaged, it may not be able to drain properly. Look for any cracks or leaks in the pump housing.
When to Call a Professional
If you are unable to drain your water pump yourself, or if you suspect that the pump is damaged, it is best to call a professional plumber. A plumber can diagnose the problem and make the necessary repairs.
Takeaways: Drain Like a Pro
Draining a water pump is a simple process that can be completed in a few steps. By following these instructions, you can save yourself the time and expense of calling a plumber.
