Unlock the Secrets: A Step-by-Step Guide to Installing Your Danco Toilet Flange Repair Kit

Tired of that wobbly toilet that threatens to send you tumbling down? If your toilet flange is the culprit, fear not! With the Danco Toilet Flange Repair Kit, you can restore stability and peace to your bathroom in a jiffy. This comprehensive guide will walk you through the process of installing the Danco repair kit step-by-step, empowering you to tackle this plumbing project like a pro.

Gather Your Tools

Before you dive into the installation, make sure you have the following tools at your disposal:

• Adjustable wrench
• Hacksaw
• Utility knife
• Measuring tape
• Safety glasses
• Plumber’s putty
• Bucket

Step 1: Remove the Old Flange

• Turn off the water supply to the toilet and flush to drain the tank.
• Disconnect the water supply line from the toilet.
• Remove the bolts securing the toilet to the floor.
• Carefully lift the toilet and set it aside.
• Use a hacksaw to cut the old flange flush with the floor.

Step 2: Prepare the New Flange

• Apply a generous bead of plumber’s putty to the bottom of the new flange.
• Position the new flange over the old flange and press down firmly to seal it.

Step 3: Secure the Flange

• Insert the bolts into the holes in the flange.
• Tighten the bolts using an adjustable wrench.
• Ensure the flange is securely attached to the floor.

Step 4: Install the Toilet

• Place the toilet over the new flange and align the holes.
• Insert the bolts into the holes and tighten them using an adjustable wrench.
• Reconnect the water supply line to the toilet.

Step 5: Set the Wax Ring

• Apply a bead of plumber’s putty around the base of the toilet.
• Place the wax ring on the flange and press down firmly.
• Set the toilet on the wax ring and press down to seal it.

Step 6: Tighten the Bolts

• Use an adjustable wrench to tighten the bolts on the toilet.
• Ensure the toilet is stable and does not wobble.

Step 7: Reconnect the Water Supply

• Turn on the water supply to the toilet.
• Check for any leaks around the base of the toilet.
• If there are no leaks, you have successfully installed the Danco Toilet Flange Repair Kit.

Troubleshooting

If you encounter any issues during the installation, here are some troubleshooting tips:

• Leaking around the base of the toilet: Ensure the wax ring is properly seated and the bolts are adequately tightened.
• Wobbly toilet: Check if the flange is securely attached to the floor and the bolts are not loose.
• Water supply not reconnecting: Make sure the water supply line is properly connected to the toilet.

What You Need to Know

Q: Can I use the Danco Toilet Flange Repair Kit on all toilets?
A: Yes, the Danco Toilet Flange Repair Kit is compatible with most standard toilets.

Q: How long does it take to install the Danco Toilet Flange Repair Kit?
A: The installation process typically takes around 30-60 minutes.

Q: Do I need to hire a plumber to install the Danco Toilet Flange Repair Kit?
A: No, you can install the kit yourself with the right tools and by following the instructions provided.