DIY Bathroom Remodel: Install Everbilt Tub Spout with Diverter for a Refreshing Upgrade
What To Know
- Installing an Everbilt tub spout with diverter is a straightforward task that can be accomplished with basic tools and a little bit of elbow grease.
- However, you will need to purchase a separate diverter valve if you wish to have the ability to switch between showerhead and spout.
- Plumber’s tape is used to create a watertight seal between the spout and the tub wall.
Everbilt tub spouts with diverters provide both convenience and style to your bathroom. If you’re embarking on a DIY project to install one yourself, this comprehensive guide will empower you with the knowledge and step-by-step instructions to accomplish the task seamlessly.
Materials Required
- Everbilt tub spout with diverter
- Adjustable wrench
- Plumber’s tape
- Towel
- Screwdriver (optional)
Safety Precautions
Before beginning the installation, ensure you have turned off the water supply to your tub. Wear safety glasses to protect your eyes from any flying debris.
Step-by-Step Installation
1. Remove the Old Spout
Using an adjustable wrench, carefully unscrew the old tub spout counterclockwise. If the spout is stubborn, wrap it with a towel to provide extra grip.
2. Clean the Connection Surface
Thoroughly clean the threads on the tub wall where the new spout will be installed. Remove any old sealant or debris.
3. Apply Plumber’s Tape
Wrap plumber’s tape clockwise around the threads of the new spout, applying several layers. This will create a watertight seal.
4. Install the New Spout
Hand-tighten the spout onto the tub wall. Use the adjustable wrench to further tighten the spout, but avoid overtightening.
5. Attach the Diverter
Locate the diverter valve on the tub spout. Connect the diverter handle to the valve by inserting it and tightening it with a screwdriver (if necessary).
6. Restore Water Supply
Turn on the water supply and check for any leaks. If there are leaks, tighten the spout or diverter further.
7. Final Touches
Wipe away any excess water or sealant using a towel. Your Everbilt tub spout with diverter is now successfully installed.
Troubleshooting Common Issues
Spout is Leaking
- Check if the plumber’s tape was applied correctly.
- Ensure that the spout is properly tightened.
- If the leak persists, contact a professional plumber.
Diverter is Not Working
- Make sure the diverter handle is fully inserted and tightened.
- Inspect the diverter valve for any blockages.
- If the diverter still malfunctions, consider replacing it.
Spout is Loose
- Use an adjustable wrench to tighten the spout further.
- Apply additional plumber’s tape to the threads.
- If the spout remains loose, consult a plumber for assistance.
Final Note
Installing an Everbilt tub spout with diverter is a straightforward task that can be accomplished with basic tools and a little bit of elbow grease. By following these step-by-step instructions and troubleshooting tips, you can enjoy a fully functional and stylish tub spout for years to come.
What People Want to Know
Q: Can I install an Everbilt tub spout without a diverter?
A: Yes, you can install an Everbilt tub spout without a diverter. However, you will need to purchase a separate diverter valve if you wish to have the ability to switch between showerhead and spout.
Q: What is the purpose of plumber’s tape?
A: Plumber’s tape is used to create a watertight seal between the spout and the tub wall. It prevents water from leaking through the threads.
Q: How often should I replace my tub spout?
A: The lifespan of a tub spout depends on the material and usage. In general, it is recommended to replace a tub spout every 5-10 years.
