Say Goodbye to Clogged Drains: The Ultimate Guide to Installing a Moen Push Down Drain

Installing a Moen push down drain may seem like a daunting task, but with the right tools and a step-by-step guide, you can tackle it with confidence. This comprehensive guide will provide you with all the necessary information and instructions to ensure a successful installation.

Tools You’ll Need:

• Adjustable wrench
• Plumber’s putty
• Utility knife
• Screwdriver
• Drain cleaner (optional)

Safety Precautions:

• Wear safety glasses and gloves.
• Turn off the water supply to the sink before starting.
• If the drain is clogged, use a drain cleaner to clear it before proceeding.

Step-by-Step Installation Instructions:

1. Remove the Old Drain:

• Place an adjustable wrench on the drain flange and turn it counterclockwise to detach it from the sink.
• Remove the old drain assembly, including the stopper, linkage, and tailpiece.

2. Clean the Sink Opening:

• Thoroughly clean the sink opening around the drain hole using a damp cloth.
• Apply a thin layer of plumber’s putty around the drain flange to create a watertight seal.

3. Insert the New Drain Assembly:

• Insert the new drain assembly into the sink opening.
• Tighten the drain flange using the adjustable wrench, ensuring it is snug but not overtightened.

4. Install the Stopper:

• Place the stopper into the drain opening.
• Insert the stopper linkage into the stopper and secure it with the included screw.

5. Connect the Tailpiece:

• Connect the tailpiece to the drain flange and tighten it with the adjustable wrench.
• Ensure the tailpiece is properly aligned with the drainpipe.

6. Install the Push Button:

• Locate the push button assembly and insert it into the drain flange.
• Tighten the push button using the screwdriver.

7. Test the Drain:

• Turn on the water supply and test the drain.
• Push down and release the button to ensure the stopper opens and closes smoothly.

Troubleshooting Tips:

• If the drain is leaking, check the plumber’s putty seal and tighten the drain flange.
• If the stopper is not opening or closing properly, adjust the stopper linkage.
• If the drain is slow, use a drain cleaner to remove any clogs.

Replacing the Push Button:

• If the push button becomes damaged or worn, it can be replaced easily.
• Use a screwdriver to unscrew the old push button.
• Insert the new push button into the drain flange and tighten it.

Maintenance Tips:

• Regularly clean the drain assembly with a mild detergent and water.
• Lubricate the stopper linkage occasionally to ensure smooth operation.
• If you experience any problems with the drain, consult a licensed plumber.

Wrapping Up:

Installing a Moen push down drain is a straightforward task that can be completed in a short amount of time. By following these detailed instructions and taking the necessary precautions, you can ensure a successful and leak-free installation. Enjoy the convenience and functionality of your new Moen push down drain!

Common Questions and Answers

Q: How often should I clean the drain assembly?
A: It is recommended to clean the drain assembly every few months to prevent clogs and maintain proper drainage.

Q: Can I use any type of drain cleaner?
A: It is best to use a drain cleaner that is specifically designed for bathroom drains. Avoid using harsh chemicals that can damage the drain assembly.

Q: What should I do if the push button gets stuck?
A: If the push button gets stuck, try lubricating it with a small amount of petroleum jelly or WD-40. If the problem persists, consult a plumber.