DIY Delight: How to Install a Shower Tray on Legs Like a Pro

Installing a shower tray on legs is a straightforward task that can be completed in a few hours, even by DIY enthusiasts. This guide will provide you with all the necessary steps to ensure a secure and functional shower installation.

Materials You’ll Need

• Shower tray
• Legs
• Level
• Screwdriver
• Adjustable spanner
• Plumber’s sealant
• Silicone sealant

Step 1: Determine the Shower Tray Position

• Decide on the desired location for the shower tray.
• Measure the space and ensure the tray fits comfortably.
• Mark the floor where the legs will be placed.

Step 2: Install the Legs

• Attach the legs to the shower tray using the screws provided.
• Tighten the screws securely using an adjustable spanner.
• Check the level of the tray using a spirit level. Adjust the legs if necessary.

Step 3: Connect the Drain

• Apply plumber’s sealant to the drain hole on the shower tray.
• Insert the drain fitting and tighten it using an adjustable spanner.
• Connect the drainpipe to the fitting.

Step 4: Seal the Tray

• Apply a bead of silicone sealant around the edges of the tray where it meets the wall.
• Smooth the sealant using your finger or a sealant tool.
• Allow the sealant to cure for 24 hours.

Step 5: Install the Shower Panel

• Position the shower panel on the wall above the tray.
• Mark the screw holes and drill pilot holes.
• Secure the panel to the wall using screws.

Step 6: Connect the Showerhead

• Attach the showerhead to the shower panel.
• Connect the shower hose to the showerhead and the panel.

Step 7: Test the Shower

• Turn on the water supply and check for any leaks.
• Adjust the legs as needed to ensure the tray is level.
• Allow the water to run for a few minutes to flush out any debris.

Tips for Installation

• Use a spirit level to ensure the tray is level in all directions.
• Tighten the legs securely to prevent movement.
• Apply a generous amount of sealant to prevent water leakage.
• Allow the sealant to cure completely before using the shower.

Troubleshooting

• Leak from the drain: Check the drain fitting and tighten if necessary.
• Leak from the edges of the tray: Apply more sealant around the edges.
• Unstable tray: Adjust the legs or replace them with longer ones.

Final Thoughts

Installing a shower tray on legs is a simple and rewarding task that can enhance the functionality and aesthetics of your bathroom. By following the steps outlined in this guide, you can ensure a secure and leak-free installation that will provide years of trouble-free use.

Questions We Hear a Lot

1. What type of legs should I use for my shower tray?

• Choose legs that are made of durable materials such as stainless steel or adjustable in length to accommodate uneven floors.

2. How often should I clean the shower tray?

• Clean the tray regularly using a mild bathroom cleaner to prevent dirt and mold buildup.

3. What is the best way to prevent leaks from the shower tray?

• Apply a generous amount of silicone sealant around the edges of the tray and allow it to cure completely before using the shower.