Unclog Your Drains in Minutes! How to Remove a Zurn Floor Drain with Ease
What To Know
- Thoroughly clean the drain body and trap using a drain cleaner or a mixture of baking soda and vinegar.
- If the drain is severely clogged, consider using a drain snake to remove the blockage before attempting to remove the drain.
- Remove the drain grate and use a drain cleaner or a mixture of baking soda and vinegar to dissolve the clog.
Zurn floor drains are commonly found in commercial and industrial settings. Over time, they can become clogged with debris, making it necessary to remove them for cleaning or replacement. Here’s a step-by-step guide on how to remove a Zurn floor drain:
1. Safety First
Before starting, ensure you have the necessary safety gear, including gloves, safety glasses, and a mask. Turn off the water supply to the drain to prevent flooding.
2. Remove the Grate
Locate the drain grate and use a screwdriver or wrench to unscrew the bolts holding it in place. Carefully lift the grate off and set it aside.
3. Disconnect the Trap
Beneath the grate, you’ll find a trap that collects debris. Use a wrench to loosen the nuts connecting the trap to the drain body. Carefully remove the trap and empty its contents.
4. Unscrew the Drain Body
The drain body is the main part of the floor drain. Use a wrench to loosen the bolts holding it to the floor. Carefully lift the drain body out of the hole.
5. Clean the Drain and Trap
Thoroughly clean the drain body and trap using a drain cleaner or a mixture of baking soda and vinegar. Remove any debris or buildup that may be blocking the drain.
6. Reassemble the Drain
Once the drain and trap are clean, reassemble them in reverse order. Connect the trap to the drain body and tighten the nuts. Place the drain body back into the hole and bolt it in place.
7. Replace the Grate
Finally, replace the drain grate and tighten the bolts to secure it. Turn on the water supply and check for any leaks.
Tips for Removing a Zurn Floor Drain
- Use a drain snake: If the drain is severely clogged, consider using a drain snake to remove the blockage before attempting to remove the drain.
- Lubricate the bolts: If the bolts are rusted or stuck, apply a penetrating lubricant to loosen them.
- Be patient: Removing a Zurn floor drain can be time-consuming, especially if it’s heavily clogged. Don’t force anything and proceed cautiously to avoid damage.
- Call a plumber: If you encounter any difficulties or the drain is still clogged after cleaning, don’t hesitate to call a professional plumber for assistance.
Troubleshooting Common Zurn Floor Drain Problems
Clogged Drain
- Causes: Debris, hair, or other objects can accumulate in the drain, causing a blockage.
- Solution: Remove the drain grate and use a drain cleaner or a mixture of baking soda and vinegar to dissolve the clog.
Leaking Drain
- Causes: Damaged or loose seals, cracked drain body, or improper installation.
- Solution: Inspect the seals and replace if necessary. Tighten the bolts holding the drain body in place. If the drain body is cracked, it may need to be replaced.
Slow Draining
- Causes: Partial blockage in the drain or trap, buildup of soap scum or grease.
- Solution: Remove the drain grate and trap and clean them thoroughly. Use a drain cleaner or a mixture of baking soda and vinegar to dissolve any buildup.
Malfunctioning Grate
- Causes: Broken or misaligned grate, loose bolts.
- Solution: Inspect the grate and bolts. Tighten any loose bolts or replace the grate if necessary.
Top Questions Asked
How often should I clean my Zurn floor drain?
Regular cleaning is essential to prevent clogs and ensure proper drainage. Aim to clean the drain every 3-6 months, or more frequently in high-traffic areas.
Can I use bleach to clean my Zurn floor drain?
Bleach is not recommended for cleaning Zurn floor drains. It can damage the metal components and cause corrosion.
What is the best drain cleaner for Zurn floor drains?
Commercial drain cleaners specifically designed for floor drains are recommended. Follow the manufacturer’s instructions carefully to avoid damage to the drain.